extruder machine, aglo & mixer, hydrolic injection moulding machine for sale

extruder machine, aglo & mixer, hydrolic injection moulding machine for sale

Required Engineering Part

Required Engineering Part

The specific requirements are as below (The drawing and specific technical data is attached below.):  1. The material: Thermoplastic(ABS)  2.Quantity :5,000,000 / 8,000,000 / 12,000,000 pcs 3. Dimension:Approximately 3.0 inch x 1.164 inch x 0.8 inch 4.Delivery time: 12 months  5. Terms of payment:the first 40%(T/T by bank)of the total value as the down payment after signing the contract and the balance 60% (T/T by bank) [...]

Windsor 1100tonne machine for sale

Windsor 1100tonne machine for sale

  Injection Unit Specs Screw diameter 150 Injection Pressure 1350 Stroke volume 9190 Screw stroke 520 Max.Injected weight 1) 7810 Injection rate 1600 `(1940) `(2050) Plasticising Rate 1) 173 `(200) `(227) Screw length 17.3 Screw revolutions 170 Screw torque max 1180 Nozzle holding force 185 Number of heating zones 6 Installed heating capacity 91 Pump [...]

Demag Machinery for sale

Demag Machinery for sale

   

Used Machinery for Sale

Used Machinery for Sale

  Used Injection Moulding Machine for Sale SN:  023 LN: AH/00329   LOC: 3 ID,, WKG: 60881 KGS.MFD. NO OF PKGS  : 2 PKG DESC. : 2 NOS. VANDORN BRAND. USED INJECTION MOULDING MACHINES. MODEL NO. 500H-RS-60F-LP. YEAR OF MFD. JUNE 1993. MODEL NO. 700H-RS-165F-CU-LP. YEAR OF MFD. AUG. 1990. MADE IN USA OCTROI RATE: 5.5%        [...]

FAQs

.   Fault Probable Cause Suggested Remedy Parison stretch is more Melt temperature high, slow extrusion rate, low melt index material. Reduce material temperature, increase extrusion rate, use right melt index material Rough surface, melt fracture or chatter marks in parison Low melt temperature, melt fracture of material, die causing fracture of material.   Extrusion [...]

Materials

            Properties of some thermoplastic materials[32][33] name Symbol Density [g/cm3] Tensile strength [MPa] Flexural strength [MPa] Elastic modulus [GPa] Elongation at rupture [%] Thermal stability [°C] Expansion at 20°C [10−6/°C]   High Density Polyethylene HDPE 0.95 31 40 1.86 100 120 126 [32] Low Density Polyethylene LDPE 0.92 17 14 0.29 500 [...]

Types of Blow Moulding

Extrusion blow moulding In extrusion blow moulding (EBM), plastic is melted and extruded into a hollow tube (a parison). This parison is then captured by closing it into a cooled metal mold. Air is then blown into the parison, inflating it into the shape of the hollowbottle, container, or part. After the plastic has cooled sufficiently, the [...]

Blow Moulding

Blow moulding (also known as blow moulding or blow forming) is a manufacturing process by which hollow plastic parts are formed. In general, there are three main types of blow moulding: Extrusion blow moulding, Injection blow moulding, and Stretch blow moulding. The blow moulding process begins with melting down the plastic and forming it into a parison or preform. The parison [...]

Introduction

We are dedicated to delivering total solutions for Plastic Processing Industry. We represent exclusively select organizations across the globe, for their State ofArt Technologyand Equipments. Troubleshooting tips is our core competency and we fill gaps by providing practical solutions. Our efforts are concentrated towards proving value to the Customer.   Experience and constant updates has [...]